Bozzle Tungsten Carbide Nozzle – 0.5mm

The Bozzle nozzle is the very first high flow (and lower back pressure) tungsten carbide nozzle for 3D printing applications.

Tungsten carbide nozzles are capable of printing all 3D printing filaments due to their exceptional hardness, ultra high operating temperature and high thermal conductivity.

0.5mm orifice
No inserts – constructed out of a solid piece of tungsten carbide there are no inserts here
Non stick surface finish
Significantly increased layer to layer adhesion at same printing temperatures vs hardened steel nozzles
Compatible with V6 and MK8 hotend heatblock

This nozzle requires hot tightening. Install the nozzle, heat hotend to 20c over desired use, and hand tighten with a 6mm or 1/4″ socket.

This nozzle will print every material.

• 17 November 2022
• Freedom
• 3D printing, Annex Engineering, Bozzle, nozzle, Rentable Socks#7689, Stuff for Nerds, tungsten carbide